CONTACTLESS THERMOMETER URGO
$21.70
Distance measurement.
Backlit screen.
Hygienic measurement.
Multi-purpose: bodies and objects.
Memory of 30 measurements.
Backlit screen.
Hygienic measurement.
Multi-purpose: bodies and objects.
Memory of 30 measurements.
3664492022895
Attention, there is only one left
3
items in stock.
- Comment finaliser et valider ma commande
Distance measurement.
Backlit screen.
Hygienic measurement.
Multi-purpose: bodies and objects.
Memory of 30 measurements.
Thanks to its high sensitivity sensory technology including an infrared sensor, URGO Contactless Thermometer takes the temperature remotely in just 3 seconds. It is able to measure body temperature but also that of objects such as a bottle or a meal. Avoid all risks of transmission of infectious agents by contact thanks to its distance measurement (up to 5 cm maximum). The different alarm signals obtained depending on the displayed result facilitate the use of the thermometer. For optimal temperature monitoring, URGO Non-Contact Thermometer stores the last 30 measurements made in memory.
Infrared sensor.
Quick results.
Without contact.
Multifunction.
FOR WHAT FOR WHOM?
Chills, hot-cold sensation... Wouldn't that be a fever? Don't panic, URGO has the solution!
URGO Non-Contact Thermometer allows remote temperature measurement in just 3 seconds! Check the body temperature, but also that of objects such as your bottles.
How to use this product?
URGO Non-Contact Thermometer can measure both body and object temperatures.
Before using the URGO non-contact thermometer for the first time, remove the insulating strip from the battery compartment.
* Body temperature measurement: Before measuring, make sure that the forehead is not obstructed, such as by hair, sweat, cosmetics or hats.
Switch on the thermometer using the ON key
Once turned on, the thermometer performs a self-test and enters body temperature mode after a few seconds.
The URGO non-contact thermometer is ready to take a measurement when the “– – –” sign flashes on the screen and the symbol representing body temperature mode appears.
Hold the device at a distance of about 5 centimeters (maximum) from the middle of the forehead with the sensor pointing towards the forehead (1 cm above the eyebrow).
As soon as the URGO non-contact thermometer is in the right position, press START, and slowly slide the probe from the middle of the forehead towards the temple. The measurement takes about 3 seconds.
Possible results:
If the measured body temperature is less than or equal to 37.8°Celcius, the result is announced by a long beep.
If the measured body temperature exceeds 37.8°Celsius (as in the case of a fever), 3 short beeps sound.
If the result is above or below the temperature range specific to this mode, the letters “H” or “L” will appear on the screen and three short beeps will sound. The URGO non-contact thermometer is ready for a new measurement after about 5 seconds.
Access to the last temperature taken in body temperature mode
To access the last temperature taken in body temperature mode, press the M key when the URGO non-contact thermometer is in body temperature mode.
* Object temperature measurement
Press and hold the START button while turning on the URGO non-contact thermometer using the ON button.
Once turned on, the device performs a self-test and enters object mode after a few seconds.
The URGO non-contact thermometer is ready to take a measurement when the “– – –” sign flashes on the screen and the symbol representing object temperature mode appears.
Hold the device at a distance of approximately 5 cm (maximum) from the surface of the object with the sensor pointing towards it.
Then press START to measure the temperature of the object. This measurement takes about 1 second.
At the end of the measurement, a long beep sounds and the result is displayed.
Access to the last temperature taken in object temperature mode
To access the last temperature taken in object temperature mode, press the M key when the URGO non-contact thermometer is in object temperature mode.
Access to all memory mode measurements
Press the M key when the device is off to activate the memory mode. If no result is saved, the URGO non-contact thermometer displays “0”. If results are stored, the display begins with the most recent measurement. “1” appears on the screen and automatically switches to the measurement display.
Press the M key several times in quick succession to access older measurements.
Precautions for use:
Do not use in children under 2 years old.
The device is not waterproof – Do not immerse it in water or any other liquid.
After heating an object in the microwave oven, please pay attention to the risk of burns, the surface of the object may indicate a lower temperature than that in the object.
Keep the device out of the reach of children to prevent them from swallowing the batteries or the battery compartment cover.
Before use, the device must be brought to ambient temperature (i.e. room temperature). In the event of a change in temperature between the place of storage of the device and its place of use, it is necessary to wait at least 30 minutes before use so that the device can adjust correctly to the ambient temperature.
Dirt on the infrared sensor should be gently removed using a dry cloth or cotton swab. For cleaning the sensor, do not use a tissue or paper towel.
Water, other surface liquids (eg perspiration) or condensation can interfere with infrared measurements.
Do not use the thermometer immediately after the following:
ate or drank
Have exercised
Having breastfed a baby
Consult all the precautions for use in the instructions before use.
Cleaning and maintenance :
* Storage of the URGO non-contact thermometer
The URGO non-contact thermometer contains extremely sensitive electronic components. Therefore, the device should be stored in a dry place, out of direct sunlight, and protected from shocks and vibrations.
Avoid storage in a humid place and near a heat source.
Before a long period of storage, please remove the batteries from the URGO non-contact thermometer.
* Cleaning and disinfection of the URGO non-contact thermometer
For cleaning, use an alcohol swab or a cotton cloth moistened with alcohol (70% isopropanol).
Before any new use, let the URGO non-contact thermometer dry completely.
* Battery change
The recorded measurements are kept during a battery change.
Urgo - 1 non-contact thermometer.
FEVER: WHAT IS IT?
Fever is a symptom, it is a mode of response of the body that fights infections, inflammations, vaccinations, dental flares...
It is manifested by a rise in body temperature to more than 38°Celsius. Generally not being dangerous in itself, it is not treated systematically.
Backlit screen.
Hygienic measurement.
Multi-purpose: bodies and objects.
Memory of 30 measurements.
Thanks to its high sensitivity sensory technology including an infrared sensor, URGO Contactless Thermometer takes the temperature remotely in just 3 seconds. It is able to measure body temperature but also that of objects such as a bottle or a meal. Avoid all risks of transmission of infectious agents by contact thanks to its distance measurement (up to 5 cm maximum). The different alarm signals obtained depending on the displayed result facilitate the use of the thermometer. For optimal temperature monitoring, URGO Non-Contact Thermometer stores the last 30 measurements made in memory.
Infrared sensor.
Quick results.
Without contact.
Multifunction.
FOR WHAT FOR WHOM?
Chills, hot-cold sensation... Wouldn't that be a fever? Don't panic, URGO has the solution!
URGO Non-Contact Thermometer allows remote temperature measurement in just 3 seconds! Check the body temperature, but also that of objects such as your bottles.
How to use this product?
URGO Non-Contact Thermometer can measure both body and object temperatures.
Before using the URGO non-contact thermometer for the first time, remove the insulating strip from the battery compartment.
* Body temperature measurement: Before measuring, make sure that the forehead is not obstructed, such as by hair, sweat, cosmetics or hats.
Switch on the thermometer using the ON key
Once turned on, the thermometer performs a self-test and enters body temperature mode after a few seconds.
The URGO non-contact thermometer is ready to take a measurement when the “– – –” sign flashes on the screen and the symbol representing body temperature mode appears.
Hold the device at a distance of about 5 centimeters (maximum) from the middle of the forehead with the sensor pointing towards the forehead (1 cm above the eyebrow).
As soon as the URGO non-contact thermometer is in the right position, press START, and slowly slide the probe from the middle of the forehead towards the temple. The measurement takes about 3 seconds.
Possible results:
If the measured body temperature is less than or equal to 37.8°Celcius, the result is announced by a long beep.
If the measured body temperature exceeds 37.8°Celsius (as in the case of a fever), 3 short beeps sound.
If the result is above or below the temperature range specific to this mode, the letters “H” or “L” will appear on the screen and three short beeps will sound. The URGO non-contact thermometer is ready for a new measurement after about 5 seconds.
Access to the last temperature taken in body temperature mode
To access the last temperature taken in body temperature mode, press the M key when the URGO non-contact thermometer is in body temperature mode.
* Object temperature measurement
Press and hold the START button while turning on the URGO non-contact thermometer using the ON button.
Once turned on, the device performs a self-test and enters object mode after a few seconds.
The URGO non-contact thermometer is ready to take a measurement when the “– – –” sign flashes on the screen and the symbol representing object temperature mode appears.
Hold the device at a distance of approximately 5 cm (maximum) from the surface of the object with the sensor pointing towards it.
Then press START to measure the temperature of the object. This measurement takes about 1 second.
At the end of the measurement, a long beep sounds and the result is displayed.
Access to the last temperature taken in object temperature mode
To access the last temperature taken in object temperature mode, press the M key when the URGO non-contact thermometer is in object temperature mode.
Access to all memory mode measurements
Press the M key when the device is off to activate the memory mode. If no result is saved, the URGO non-contact thermometer displays “0”. If results are stored, the display begins with the most recent measurement. “1” appears on the screen and automatically switches to the measurement display.
Press the M key several times in quick succession to access older measurements.
Precautions for use:
Do not use in children under 2 years old.
The device is not waterproof – Do not immerse it in water or any other liquid.
After heating an object in the microwave oven, please pay attention to the risk of burns, the surface of the object may indicate a lower temperature than that in the object.
Keep the device out of the reach of children to prevent them from swallowing the batteries or the battery compartment cover.
Before use, the device must be brought to ambient temperature (i.e. room temperature). In the event of a change in temperature between the place of storage of the device and its place of use, it is necessary to wait at least 30 minutes before use so that the device can adjust correctly to the ambient temperature.
Dirt on the infrared sensor should be gently removed using a dry cloth or cotton swab. For cleaning the sensor, do not use a tissue or paper towel.
Water, other surface liquids (eg perspiration) or condensation can interfere with infrared measurements.
Do not use the thermometer immediately after the following:
ate or drank
Have exercised
Having breastfed a baby
Consult all the precautions for use in the instructions before use.
Cleaning and maintenance :
* Storage of the URGO non-contact thermometer
The URGO non-contact thermometer contains extremely sensitive electronic components. Therefore, the device should be stored in a dry place, out of direct sunlight, and protected from shocks and vibrations.
Avoid storage in a humid place and near a heat source.
Before a long period of storage, please remove the batteries from the URGO non-contact thermometer.
* Cleaning and disinfection of the URGO non-contact thermometer
For cleaning, use an alcohol swab or a cotton cloth moistened with alcohol (70% isopropanol).
Before any new use, let the URGO non-contact thermometer dry completely.
* Battery change
The recorded measurements are kept during a battery change.
Urgo - 1 non-contact thermometer.
FEVER: WHAT IS IT?
Fever is a symptom, it is a mode of response of the body that fights infections, inflammations, vaccinations, dental flares...
It is manifested by a rise in body temperature to more than 38°Celsius. Generally not being dangerous in itself, it is not treated systematically.
3664492022895
3 Items
Data sheet
- Sub Category - Thermometers
- Contactless
Specific References
Customers who bought this product also bought:
Comments (0)
